Official Site of The State of New Jersey
Disinfection By Products in Community Drinking Water Systems by Maximum Haloacetic Acid Concentration and Community Water Systems, New Jersey, 2006 to 2023
Indicator Report Data View Options
Why Is This Important?
Disinfection by products (DBPs) are formed when disinfectants (such as chlorine chemicals) used during water treatment to destroy harmful bacteria and viruses, react with natural organic matter in water. Trihalomethanes (THMs) and haloacetic acids (HAAs) are produced in the largest amounts. The level of DBPs formed after disinfection depends on the source water, type of treatment, and amount of disinfectant used.
Health risks from exposure to low levels of DBPs are not well understood. Some studies suggest that DBP exposure may increase the risk of bladder and colorectal cancers and reproductive and developmental health effects.
Definition
The distribution of disinfection by products (total trihalomethane and haloacetic acid) in drinking water by community water system, population served, and year
New or more stringent MCLS for DBPs were phased in between 2003 and 2005. The MCL for total trihalomethanes was lowered from 100 micrograms per liter to 80 micrograms per liter, and a new MCL for haloacetic acids was established at 60 micrograms per liter.
Data are presented for community water systems that reported test results for the specified time interval.
Data Source
Bureau of Safe Drinking Water, New Jersey Department of Environmental Protection(https://www.nj.gov/dep/watersupply/index.html)
How the Measure is Calculated
Numerator:
Number of community water systems by HAA concentration in drinking waterDenominator:
Not Applicable
Related Health Objectives and Indicators
Environmental Public Health Tracking Indicator DW-43
Description: Disinfection by-products in community water systemshttps://ephtracking.cdc.gov/indicatorPages?selectedContentAreaAbbreviation=1&selectedIndicatorId=43